Oppo F11 Pro CPH1969 ISP Pinout For Remove User Lock and FRP

0

Here are the direct Isp Pinout for Oppo F11 Pro CPH1969 Remove Pattern Lock Bypass FRP Lock is now available. You can easily get the ISP Pinout connection of the Oppo F11 Pro by following the full guide below along with images. By using the ISP Pinout, you can easily bypass FRP lock or reset user data on your device via UFi Box. Check out the guide below.

The Oppo F11 Pro can be used to overcome some software problems on Oppo F11 Pro phone, to direct it you can use a flasher box that has direct isp feature support and usually the flasher box can also be used for repairing emmc like Easy Jtag, Ufi, etc.

Remove Pattern Lock, Screen Lock, Finger Lock in Oppo F11 Pro CPH1969 with UFI Box you can easily solve with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged, your USB socket will not properly work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Oppo F11 Pro Overview

Oppo F11 Pro sports a big 6.5-inch display and claims a 90.9 percent screen-to-body ratio. The F11 Pro has very thin bezels around the smartphone. The phone is slightly bulky at 191g and is heavier than average. It packs in a 4,000mAh battery and has support for 20W fast charging.

Read More:-  Honor 8X ISP Pinout to ByPass FRP and Pattern Lock

The Oppo F11 Pro is powered by a MediaTek Helio P70 SoC and comes with 6GB of RAM and 64GB of storage. It runs ColorOS 6 running on top of Android 9 Pie.

What is ISP Or eMMC Pinout?

ISP orIn-system programming also known as in-circuit serial programming for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile. The eMMC solution consists of at least three components – the MMC (multimedia card) interface, the flash memory, and the flash memory controller – and is offered in an industry-standard BGA package.

Oppo F11 Pro CPH1969 ISP Pinout Image

Oppo F11 Pro CPH1969 ISP Pinout

Usage of ISP Pinout :

Read/Write EMMC via ISP.
Read/Write EMMC via direct connect (EMMC installed in socket).
One-click boot repair via direct emmc connection.
Read MMC info (Many usefull info there such as read/write counter, error counter, etc)
Factory EMMC formatting.
Low EMMC formatting.
Master/Slave partition activation
EMMC smart repartition.
EMMC partition cloning.

How To Remove Oppo F11 Pro Pattern FRP Using UFI Dongle:

  • Remove the back panel of the device and connect the wire to the ISP Pinout.
  • Next, connect the correct ISP Pinout to the UFi Box
  • Check “Direct eMMC (ISP)”
  • Then Click on “Identify eMMc.
  • Connect your Oppo F11 Pro  to the PC via a USB cable.
  • Head over to the PC and open Device Manager.
  • If your device is located there, run the UFi Box.

UFI EMMC User Partition

  • Go to USERAREAPART
  • Now Click on Special Task ► [Oppo] MasterClear ► Wipe Data Only
  • Now Click on Special Task ► Clear FRP Lock
  • Done.
Read More:-  Samsung Galaxy A20s A207F ISP Pinout To ByPass FRP And Pattern Lock

Video Guide:

Leave a Reply