Huawei Y9S Test Point to ByPass FRP, Pattern Lock and Flashing


Here we will show you Huawei Y9S STK-L21 Test Point or download mode which is formerly known as Emergency Download mode. you can use this test point in any box-like MRT, UFI, UMT, Medusa just shot gold point to the ground, and connect USB cable Despite it is an advanced method, some users still prefer to use this technique to bypass the need for the officially unlocked bootloader.

Each and every phone comes with different developer options like Recovery mode, Fastboot mode/bootloader mode, and EDL mode. All these modes use to perform different testing processes. Some of them only can be used for advanced android users or developers or mobile repairing and some of them can be used by normal users.

In this guide, we will show you how to boot the device into Download to flash stock ROM. If you are thinking to install software on bootloader-locked Huawei Y9s mobile then you need to boot the device into emergency download mode. After that, you can flash it.

How To Remove Huawei Y9S User Lock and  FRP:

You can use EFT dongle, UMT dongle, octopus FRP tool, MRT key tool for remove FRP and pattern lock from Huawei Y9s or you can try other tools use the above test point to boot your phone in an emergency download mode remove Battery short test point to the ground and insert USB cable.

Huawei Y9s Test Point – Boot Huawei Y9S STK-L21 Into Download Mode:

How To Find Huawei Y9S Test Point.

  • Install “Huawei Y9S USB Drivers” on windows pc.
  • Remove back panel of the device carefully. Make sure you are not going to damage any hardware component.
  • Now check below screenshot and find the Huawei Y7a Test points.
Read More:-  Samsung Galaxy A51 A515F Test Point | Emergency Download mode

Huawei Y9S Test Point to ByPass FRP Pattern Lock and Flashing

  • Short bot points using any copper wire and attach USB cable at the same time.
  • If the device is properly connected with pc, you will see “Huawei USB Com 1.0 ” under the “device manager”.
  • Now you are free to flash stock ROM on Huawei Y9s STK-L21 mobile using Huawei tool.

Uses Of Huawei Y9S Test Point

  • Install stock ROM on Huawei Y9S.
  • Flash Huawei Y9S without unlocking the bootloader. Bootloader unlocking permission not required.
  • Recovery dead Huawei Y9S by flashing firmware.
  • Install stock ROM easily, if the device is not able to boot into fastboot mode or device stuck on Huawei Logo.

What is Screen Lock for Huawei Y9S:

Screen Lock is a privacy lock for android, many ways to enable screen locks on your device if screen lock enabled then the user need to enter the right password, Pattern, Pin lock to access devices again, screen lock means you can lock your device by pattern lock, password lock, pin lock, nowadays face locks and fingerprint lock also include in the screen locks menu,

Why we need to Remove Screen Lock

If you forget the screen locks from your device and went to remove the pattern lock from your device then I am here to share with you the right method to Remove Pattern lock, Password lock, Pin locks.

or If your device shows too many attempts to unlock the pattern if you want to unlock then follow the below process very carefully.

Leave A Reply

Your email address will not be published.