Repair: Samsung Galaxy A03s Backlight Ways, Display Light Problem

0

Looking for solutions to repair the damage to Samsung Galaxy A03s Backlight Ways Problem, LCD Display Ways,? then you are at the right place in this post we will provide solutions to repair the damage to Samsung Galaxy A03s SM-A037F Backlight Problem, If you get a case with the display problem on the phone display or the light on the screen does not work properly.

Backlight problem is a common problem in smart-phone, mostly this problem comes when the handset drop-in water or any type of liquid damage. When any smartphone has a display light problem you will check first off all display connectors or motherboard connectors for shorting or line brack in LCD light or graphics way.

If All those Lines are ok you will check mobile for water damage, Water damage mobile handset has many types of problems LCD back lite problem is a common problem in this condition. If rust and corrosion are found in the Samsung Galaxy A03s screen socket immediately. Do the cleaning by using alcohol fluid and brushed to allow rust and corrosion on the screen socket to disappear.

In the Android kingdom, Samsung Galaxy phones must be the most popular devices, and the recently Samsung Galaxy A03s is already available with more functional features and beautiful interfaces. However, you could also have some unexpected bugs or problems when using Galaxy phones Samsung Galaxy A03s. The backlight issue is a pretty common issue for Android devices.

Some Possibles Reason Why Samsung Galaxy A03s Backlight Or Display Not Working:

  • The result of a dropped phone.
  • The phone falls and the screen breaks.
  • Samsung phones are exposed to liquids or water.
  • Damage to internal components Samsung Galaxy A03s.
Read More:-  Samsung S7262 Charging And Usb Ways

What is the LCD and backlight on the screen?

An LCD is a digital display interface of your phone, it is an interactive part where you see what happens when you operate or tap on the icon, watch a video, play music or games, etc. When the LCD (Liquid Crystal Display) is damaged or destroyed, you will not be able to enjoy it as before.

This is where the LCD backlight comes in, the backlight is a set of LEDs (Light-emitting Diodes) and fits well in the screen layer to provide illumination to the LCD screen. When the LED multiplicands the damage, it’s likely the screen will turn black without being able to produce images and light, which means you won’t be able to see anything!

Step 1- Replace Screen Samsung Galaxy A03s

Perform screen switching, if there is a rupture or crack on the screen of the Samsung phone display light problem is a common problem in smart-phone, mostly this problem comes when the handset drop-in water or any type of liquid damage.

When any smartphone has a display light problem you will check first off all display connectors or motherboard connectors for shorting or line brack in LCD lite or graphics way.

If All those Lines are ok you will check your mobile for water damage, Water damage to mobile handset has many types of problems LCD back lite problem is a common problem in this condition.

this can be the possibility of the cause of no display damage.

Step 2- Reinstall The Firmware On The Samsung Phone

No backlight damage on an Android phone could be caused by an error in the operating system found on the phone. Then you can re-install to solve the problem.

Step 3- Check The Lcd Screen Connection

After that try to check the entire socket on the PCB board, especially on the LCD display socket. Could possibly There is corrosion or rust contained in the socket, immediately do the cleaning using the liquid alcohol and assisted by brushing, so that the socket condition is clean again, and do a resoldering when the socket encountered detached.

Read More:-  Samsung GT-I9100 Power ON-OFF Key Ways Solution

Step 4- Check Circuit And Voltage

Repair  Samsung Galaxy A03s Backlight Ways Display Light Problem
The following repair step can try to check the line on the Android phone PCB board Samsung Galaxy A03s SM-A037F which is experiencing no backlight damage.

In the diagram image of the path that is connected to each component, you can do the examination by using the Multimeter. When encountered damage to the track, then it can be done jumper path, for normal return conditions.

Step 5- Replace Component

With the diagram drawing guide, you can perform checks on interconnected components. If there is a defective component after checking and measuring using a multimeter. You can make changes to The new component with the same value.

Hopefully with a guide through the diagram image that has been given. You have got the best solution to the problem.

Please note, Do check on any phone damage carefully, in order to avoid increased damage and will harm yourself. Thanks.

Leave A Reply

Your email address will not be published.