Xiaomi Redmi 10C Charging Ways | Repair Not Charging Problem


Xiaomi Redmi 10C Charging Ways | Repair Not Charging Problem

In this post, we’ll address how to use jumpers to fix the midrange Xiaomi Redmi 10C not charging issue. For the pricing range, this device’s specifications are superb. As long-time providers of help for Android customers, we can already predict that this particular charging and power-related issue will be among the first ones Xiaomi Redmi 10C purchasers may encounter.

First, ensure that your device’s charging port is not blocked or damaged. If it is, gently remove any debris with a small object such as a toothpick. When the port is clear, try plugging in your charger and charging the device.

If the Xiaomi Redmi 10C still does not charge, the next step is to ensure that the charger is in good working order. To do so, plug the charger into a different outlet and try charging the device. If the device does not charge, the charger may need to be replaced.

If the charger is working properly, the next step is to check the battery life of the device. To do this, press and hold the power button until the device turns off. Once the device is off, press and hold the power button again until the device turns back on. If the battery life indicator is low, it might be time to replace the battery.

Hardware Reasons for Xiaomi Redmi 10C Not Charging Problem

There are four basic hardware-related reasons why your Xiaomi Redmi 10C could be charging slowly, and I will explain each of them in turn and in order of increasing probability. The issue could be:

  1. There is dirt, dust, or debris lodged in the charging port.
  2. The power adapter is damaged or faulty.
  3. The USB cable is no longer working properly.
  4. You are using the wrong power adapter for your phone, or a weak USB port.
Read More:-  Redmi 6A Touch Not Working Problem Solution Touch Ways

Xiaomi Redmi 10C Specifications

The smartphone boasts a non-removable Li-Po 5000 mAh battery with 18W fast charging capability, ensuring extended use without frequent charging. Running on the Android 11 + MIUI 13 operating system, the device offers smooth and efficient performance.

Available in Graphite Gray, Ocean Blue, and Mint Green, the device is powered by the Qualcomm SM6225 Snapdragon 680 4G Octa-core processor, supported by the Adreno 610 GPU for seamless graphics processing.

The rear camera is comprised of a 50 MP (wide) + 2 MP (depth) sensor lenses, while the front camera is a single 5 MP setup. The 6.71-inch IPS LCD capacitive touchscreen delivers a resolution of 720 x 1650 pixels.

The Xiaomi Redmi 10C is fitted with a rear-mounted fingerprint sensor, as well as an accelerometer and proximity sensor. Other features include USB Type-C 2.0,

Xiaomi Redmi 10C Charging Ways – Repair Not Charging Problem

In the below image we draw the Xiaomi Redmi 10C charging ways and its jumper check continuity using a multimeter if any track damage makes a jumper on the Xiaomi Redmi 10C motherboard.

Xiaomi Redmi 10C Charging Ways   Repair Not Charging Problem

  1. First, open the mobile
  2. Clean the section of the charging connector of the mobile motherboard
  3. Remove the old charging connector and add a new connector

How To Repair Xiaomi Redmi 10C Not Charging Problem:

Xiaomi Redmi 10C Charging Ways Charging Jumper Solution Slow Or Fake Charging Solution

After the mobile phone disassembles, you will need to take some steps shown in the diagram above.

The following are some of the most common reasons for difficulty in charging and other battery-related issues, such as the gray battery issue:

  • Shorted or defective diode
  • Shorted or defective capacitors
  • Defective resistors
  • Poorly functioning or damaged charging coil
  • The shorted or faulty integrated circuit
  • Poorly functioning USB port
  • Incomplete connection.
Read More:-  Xiaomi Poco X3 Pro Backlight Ways | Repair Display Light Problem

Xiaomi Redmi 10C charging problem can be repaired with a few simple steps. With the help of a few tools, you can diagnose the issue and then replace the faulty components. If done correctly, your phone should be functioning normally and charging properly in no time.

More information about this problem and solutions for new tips and tricks are going to this page, if there are new updates, there will be updates. Below are some related posts, you can read more about mobile phones.


Leave A Reply

Your email address will not be published.