Vivo V23 5G Test Point to Remove Pattern, FRP And Flashing


In this guide, we will show you the real image of the Isp pinout and test point for the Vivo V23 5G. By using the Testpoint, you can easily restore the stock ROM, bypass FRP lock, Remove MDM Lost Mode (Device Lock, No Downloads Mode, No Recovery), and Remove FRP Direct by UFS.

On MediaTek (MTK) devices, the download mode is a special mode that allows the device to be connected to a computer and have firmware or other software updates applied to it. To enter download mode on an MTK device, you will typically need to use a combination of hardware buttons on the device itself, or use test points to establish a connection with the device’s internal components.

To enter download mode on an MTK device using test points, you will need a specialized tool such as a JTAG debugger or a USB-to-serial adapter, as well as knowledge of the device’s circuit board and test point locations. Once you have these tools and knowledge, you can use the test points to establish a connection with the device’s internal components and then use specialized software on your computer to apply firmware or other updates to the device.

It is important to note that attempting to use test points or enter download mode on an MTK device without proper knowledge or equipment can cause damage to the device. If you are not a trained technician or engineer, it is recommended that you seek the assistance of a professional to perform any firmware updates or other tasks that require access to the device’s test points.

Read More:-  Samsung Galaxy J1 Mini J105H Speaker Ways Ringer Jumper Solution

How To Remove Vivo V23 5G Pattern Lock and  FRP:

You can use the EFT dongle, UMT dongle, octopus FRP tool, or MRT key tool to remove FRP and pattern lock from Vivo V23 5G or you can try other tools use the above test point to boot your phone in an emergency download mode remove Battery short test point to the ground and insert USB cable.

Vivo V23 5G Test Point – Boot Into Download Mode:

How To Find Vivo V23 5G Test Point.

  • Install “Vivo V23 5G MTK USB Drivers” on a windows pc.
  • Remove back panel of the device carefully. Make sure you are not going to damage any hardware component.
  • Now check the below screenshot and find the Vivo V23 5G Test points.

Vivo V23 5G Test Point to Remove Pattern FRP And Flashing

  • Remove the battery and Short bot points using any copper wire and attach a USB cable at the same time.
  • Now you are free to flash stock ROM on Vivo V23 mobile using any tool.

Uses Of Vivo V23 5G Test Point

  1. Device Repairs: Repair technicians can use the test point to diagnose and repair various hardware issues on the device, such as a faulty charging port, a damaged battery, or a broken speaker.
  2. Firmware Upgrades: The test point can also be used to install firmware upgrades and software updates that cannot be installed through the device’s normal operating system.
  3. Unlocking the Bootloader: Some users may want to unlock the bootloader of their device, which can be done by using the test point to access a special boot mode.
  4. Rooting the Device: The test point can also be used to root the device, giving users administrative access to the device’s operating system and allowing them to customize the device beyond what is normally allowed.
Read More:-  Nokia 2710 Mmc Memory Card Problem Solution


Leave A Reply

Your email address will not be published.