Here is a working and tested solution for the Xiaomi Redmi 13C Not Charging issue, including charging methods and a USB jumper. When faced with this problem, start by checking or replacing the charging connector. If there is an issue after replacing the connector, refer to the provided image for jumper details. Follow the steps below to troubleshoot and resolve this charging problem effectively.
Troubleshooting charging difficulties on the Xiaomi Redmi 13C might be difficult and include firmware or hardware problems. It’s important to distinguish between the two. The steps to resolving these issues are listed below. Get familiar with typical situations so that you can identify the problem easily.
Xiaomi Redmi 13C Charging Ways Solution
For information about the charging paths and jumpers for the Xiaomi Redmi 13C, see the image below. A multimeter is used to check the Redmi 13c motherboard’s continuity and make jumpers if required to repair any track damage.
- First, open the mobile
- Then, clean the section of the charging connector of the mobile motherboard
- Then remove the old charging connector and add a new connector
If the problem continues after these fixes, refer to the image below for additional instructions on resolving your phone’s charging issue.
Hardware Reasons for Xiaomi Redmi 13C Charging Problem
There are four primary hardware-related reasons why your Xiaomi Redmi 13C could be charging slowly, and I will explain each of them in order to increase probability. The issue could be:
- There is dirt, dust, or debris lodged in the charging port.
- The power adapter is damaged or faulty.
- The USB cable is no longer working correctly.
- You are using the wrong power adapter for your phone or a weak USB port.
How To Repair Xiaomi Redmi 13C Not Charging Problem:
Once you have disassembled the mobile phone, proceed with the steps outlined in the diagram above. Check the charging jack and its connection points for any issues. If they are functioning well, try replacing the charger to verify. If the motherboard fails to display accurate readings at the charging points, following dissatisfaction with the mobile phone’s performance, refer back to the steps indicated in the diagram.
Check all parts and tracks carefully, as shown in the Xiaomi Redmi 13C diagram, for any indication of corrosion, carbon debris, water damage, or malfunctioning parts. If any parts are damaged, take extra caution when replacing a motherboard. Properly use jumpers for missing tracks.
Check out our website for the latest solutions and tips, along with more details on this problem and creative fixes. Content will be put there when it becomes available. Look through the related posts below for additional information about mobile phone issues.
