Are you a mobile technician dealing with FRP lock issues on the Samsung A06 SM-A065F? Using the ISP Pinout method with the UFI Box or Flash64 box allows you to bypass the FRP lock quickly and safely while helping restore access to the device. In this guide, we provide the Samsung A06 SM-A065F ISP Pinout along with easy step-by-step instructions to help you complete the process successfully.
Flash64 and UFI Box can bypass the FRP lock and screen lock on the Samsung A06 SM-A065F. It doesn’t matter how much knowledge you have of Android software; this method will solve the problem quickly. If you see the message “USB not recognized,” your USB device isn’t working. You can only use this method if your battery is fully charged and your USB port works properly. Please feel free to leave your questions in the comments; I will do my best to answer them.
⚙️ What is ISP Pinout (In-System Programming)?
In simple terms, an ISP lets you access the EMMC chip without removing it. You simply have to identify the board’s appropriate pinout and use a supported EMMC tool such as UFI, Easy JTAG, or Medusa Pro to attach it directly.
Isp Pinout is useful when:
- Phone is dead (black screen, no boot, no charging)
- FRP is locked, and you can’t use ADB, fastboot, or OTG bypass
- You need to dump firmware from a working unit to repair a dead one
- You’re working on a boot repair or partition restore
- Phone is detected as “unknown” in PC (EDL not working)
Samsung A06 SM-A065F ISP EMMC Pinout Image:
Here’s where things get technical. The Samsung Galaxy A06 shares a hardware layout with several BBK models, but the actual pin locations can vary slightly. You’ll find the ISP points near the EMMC chip under the metal shield.
EMMC ISP Pin Labels
CMD – Command Line
CLK – Clock
DAT0 – Data line 0
VCC / VCCQ – Power supply for EMMC
GND – Ground
💡 Note: Use a microscope or a 10x magnifier to identify the points correctly. Don’t rely on diagrams alone—confirm the layout visually.
When repairing dead boot problems, especially for devices like the Samsung A06 SM-A065F, the Easy JTAG Plus and UFI Box dongles are great for mobile repair. They are important for scenarios where the phone has been incorrectly flashed and does not display the startup logo, and is no longer responding to power.
Required Tools for ISP Pinout:
- Make sure your bench is set up with the right tools before jumping in:
- UFI Box, Easy JTAG, or Medusa Pro
- 0.1mm – 0.3mm jumper wire
- Fine tip soldering iron
- Isopropyl Cleaner (IPA 99%)
- Soldering flux
- Multimeter (for checking continuity)
How to Connect ISP to EMMC Box
- Open the back panel of the device first.
- Connect the wire with the correct ISP Pinout.
- Then connect the ISP Pinout to the UFi Box and connect your device via USB cable to the PC.
- Go to the Device Manager on your PC.
- You will see your device in the list > Run the UFi Box and locate the scatter file.
- Go to the user Partition / Special Task and click on Reset FRP on the UFI Box.
- You’re done.
