If your Realme C61 smartphone is not charging, or is experiencing Slow Charging, or the battery percentage is stuck, the issue is usually related to the charging connector, CC board, or motherboard lines. This post shares the Realme C61 Charging Ways and Jumper Solution to help you fix these issues.
Technicians should always check the charging port condition first. If the connector and CC board are fine, carefully inspect the jumper lines on the mainboard. You can restore the phone’s charging function without replacing the sub-board by applying the correct charging jumper points.
If your Realme C61 smartphone is not charging or showing issues like slow charging, no charging symbol, or battery not increasing percentage. In that case, the problem may be related to the charging connector, CC board, or motherboard connection. This guide provides a complete Realme C61 Charging Ways Repair Solution with jumper points.
In many cases, charging problems in Realme C61 are caused by loose connections, broken jumper lines, or physical damage to the USB charging port. Check each hardware part and apply the correct jumper solution; you can bring the device back to normal functioning without changing the sub-board.
Reasons Why Realme C61 Is Not Charging
There are four basic hardware-related reasons why your Realme C61 could be charging slowly, and I will explain each of them in turn and in order of increasing probability. The issue could be:
- There is dirt, dust, or debris lodged in the charging port.
- The power adapter is damaged or faulty.
- The USB cable is no longer working properly.
- You are using the wrong power adapter for your phone, or a weak USB port.
How To Repair the Realme C61 Not Charging Problem:
- First, disassemble the Realme C61
- Check the charging sub-board and the motherboard connection.
- You can identify a scratch or a broken line on the sub-board in the bottom-left corner of the picture.
- Form a jumper wire between the sub-board (charger port region) and the correct location of the main motherboard using the directions in the image.
- Employ flux and micro-soldering equipment in order to prevent additional harm.
- Resassemble the device and check the charging operation..
Red line: Route for jumper wire to re-establish the interrupted circuit.
Check all parts and tracks carefully, as shown in the Realme C61 diagram, for any indication of corrosion, carbon debris, water damage, or malfunctioning parts. Take extra caution when replacing a motherboard if any parts are damaged. Make proper use of jumpers for missing tracks.
Check out our website for the latest solutions and tips, along with more details on this problem and creative fixes. Content will be put there when it becomes available. Explore the related posts below for more information about mobile phone issues.
