In this post, we’ll show you the Oppo A18 CPH2591 Test Point that helps you reboot to MediaTek BROM Flash mode and repair the Bricked Dead Boot Problem, Flash Unlock Pattern Bypass FRP Lock, Remove MDM and KG Lock, and resolve other software-related issues easily.
A test point is a special hardware point on the motherboard of the smartphone. By shortening the test points, you can force the device into (brom) mode, which allows the repair tool to communicate with the phone at a deep level. It is very useful for this:
What is the Oppo A18 Test point?
Many Oppo A18 devices face issues such as a dead boot, system corruption, or FRP lock. In such cases, normal download or fastboot mode cannot work. When the Oppo A18 test point method becomes the only solution. With the help of the test point, you can force the device into download mode and repair it using tools such as SP Flash Tool, Hydra Tool, CMMTK2, Unlock Tool, or UMT. Without using the test point, these devices cannot detect the device when it is completely dead.
- Dead boot issues fixing
- Bypassing FRP lock
- Firmware flashing
- IMEI and security partitions
- Data recovery operation
Oppo A18 Test Point Image:
The following image will guide you through shorting the pinout and successfully rebooting your Oppo A18 to Emergency Download Force Brom Mode.
Step-by-step Guide to Use Oppo A18 Testing Point
- First, switch off the Oppo A18 completely and remove the back cover.
- Disconnect the battery connector for safety.
- Locate the Oppo A18 test point on the motherboard (refer to the diagram above).
- Use a tweezer or jumper wire to shorten the test point on the ground.
- Connect the device to your PC using a USB cable.
- Open your Mobile Repair tool. and use the function you want.
- This process is not easy, so it is recommended that only experienced technicians attempt it. Running the test point incorrectly can cause permanent damage to the phone.
