Xiaomi Redmi Note 2 Touch Screen Problem Touch Ways
Xiaomi Note 2 Touch Screen Not Working Problem Solution Touch Ways Touch Screen Jumper
Solutions in this article are for Xiaomi Redmi Note 2 Touch Screen problem. If your Xiaom Note 2 Plus touch screen is not working diagrams in this post can be helpful to you.
Without doubts, Xiaomi Redmi Note 2 owns the hearts of young people due to its cool style, cheap price, practical features, and gorgeous colors. We have to admit it’s popular, but we cannot deny that it brings lots of troubles as well. People who use Redmi Note 2 have met problems from screen, sound, internet/ WiFi or Bluetooth connection to battery charge, and also other categories of matters. They really drive people mad. However, we cannot just give it up. Wise and sweet Gearbest blog collected the questions and summarized the answers in this troubleshooting guide, just aiming for solving your problems.
Reasons of Problems
The touch screen has encountered any kind of water damage or moisture.
Phone’s touch screen is damaged due to any physical collision. Touch Screen IC might be faulty.
Loose connection of Xiaomi Redmi Note 2 touch screen connector with the board.
The screen might be broken which also affected touch screen. Dry soldering of touchscreen onboard connector. Connector strip might be damaged.
Hardware Solution
The very first thing that you need to do is to unplug, clean and reconnect touch screen connector strip and check, in most cases, this has found to be a good and effective solution to this problem.
If the above step fails then look for any traces of water damage on yourXiaomi Redmi Note 2 motherboard. In case you find that then properly clean the entire board and also use a heat gun for a few seconds so that there are no traces of water left behind. This is also one effective solution for that and any phone that has touch screen problem due to water or moisture is able to overcome this type of problem.
Now check whether touch screen connector is loose when connected with an onboard connector or not, in case it is then all you have to do is to replace display screen and check.
If everything else fails then gently heat Touch IC. If the touch screen is faulty replace it, as you don’t have any other option left than that.
Make sure that you check touch of your phone after performing every step, and also make sure that you turn the screen off before disconnecting display screen.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Xiaomi Redmi Note 2, Touch Screen, Touch Problem, Touch Solution, Touch Screen Ways, Touch Screen Jumpers
