Here’s the full solution for Samsung Galaxy S3 I9305 LTE not charging problem such as charger no response or it shows no charging indication when a working charger is being plug-in.
The solution below shows the charging circuit of Samsung I9305 that holds and protect the device during charging operation. If these said circuit components get damaged it results to charging problem issues. These components were composed of a chip fuse, chip diode, filter coil and capacitor.
Just refer to the solution below to locate where these said components being mounted on Samsung GT-I9305 PCB board.
Hardware Solution for Samsung Galaxy S3 I9305 Charging Usb issue
Check and replace the battery Charger.
Check and replace the phone’s battery. A fully drained battery won’t charge up.
Check/clean or replace the charging jack connector and the PCB pads.
Trace the charging Ways Marked in below image. If any of track ways is missing just make a jumper with jumper wire.
Credit To d-artigo
Samsung Galaxy S3 I9305 Charging Solution Charge Ways,Usb Jumper,Usb Not Recognized Problem,Charging Ways.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.
