Nokia Lumia 930 Power On Off Button Ways
Nokia Lumia 930 Power Key Ways Button Jumper
This solution is for Nokia Lumia 930 Power Button Ways and Jumpers points. If your phone’s power button is not working you can use the guide in this article to solve your problem.
For some reason the power switch terminal solder pads may also been severely damaged and lifted by the users., In order to fix this problem we need to bond the power switch to its original position so that it won’t easily break. But the problem is, we cannot apply a solder on its terminal because the solder pads was already been lifted. To avoid hassle digging the PCB board you can refer to this solution below to locate which particular components where we can apply and mend a jumper wire to reconnect the said open line path of the power switch connection.
Hardware Solution:
Solution by d-artigo
Nokia Lumia 930 Dead Does Not Start Solution
If the Nokia Lumia 930 On-Off key may not working, you can trace its connection line paths as shown on solution above. Just apply a jumper wire if the line tracks is open or cut.
Check all the components that are surrounding your Power IC, if any of them is found to be faulty then replace it, as if any of the component is damaged then your Power IC won’t turn ON.
If all the above methods fail to resolve your power problems then all you have to do is to gently heat your Power IC with the help of a heat blower, if it fails to perform then re-ball and re-fix the IC.
If heating or re-balling of Power IC doesn’t do any good to you then replace your Power IC, as there is nothing you can do besides all that.
Nokia Lumia 930,Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Power Problem
