Huawei Ascend G730 Battery Connector Ways Jumper Solution
Huawei G730 Battery Connecter Ways Point Jumper Solution – This time we will try to discuss the solution path on the Huawei G730 battery in this troubled afternoon The damage to the battery lines often in the causes for the track is wet or disconnected without visible breakdown lane next to where. Or these tips could be to carry out checks on the mobile phone is the Huawei Huawei G730. Here are the simple steps to overcome damage to the battery or the phone lines Huawei Ascend G730.
Steps that must be done is to check the battery lines as shown below, check the path carefully one by one, do not forget to also check through the resistor in the line, if something is broken, resold or corrosion. There is a path-breaking try to make jumpers carefully and thoroughly.
Problems
The phone is not powering ON.
Phone heats up even when power is OFF (and doesn’t turn ON also).
Phone turns OFF randomly and at any point.
Phone powers OFF when any specific application is accessed.
Reasons of Problems
The battery may be faulty.
The phone might be water damaged.
Charging connector and/or its components might be water damaged.
Battery connectors are damaged.
Power IC might be faulty.
In this post, I have marked Huawei Ascend G730 Battery Connector ways jumpers points. If you have damaged Battery Connector prints make the jumpers as shown in the diagram below to solve your problem.
Hardware Solution:
This is the pretty simple solution I have marked all positive and negative jumpers of Huawei Ascend G730 battery connector in this diagram. Before making these jumpers make sure that faulty battery connector Module is not causing this problem.
Huawei G730 Battery Connector Problem Solution, Battery Connecter Ways, Jumpers
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
