Sony Xperia C4 E5333 Battery Connector Ways Battery Jumper
If your Sony Xperia C4 E5333Battery Connector is damaged somehow by whether mishandling or any other reason you can always replace it with a new one. But if you have damaged the battery Connector prints meaning Connection points on which The Battery Connector is soldered to the Sony E5333 Battery Connector Ways motherboard no need to worry, Diagrams on the end of this article can help you.
Sony E5333 Battery Connector Ways Jumper Problem Repairing Solutions are available in the following article. Also you will find Samsung Galaxy S Duos S7562 Battery Connector Ways and Jumpers information in the diagrams further in this post.
Sony has launched Xperia C4 loaded with 13 & 5 MP Cameras, 5.5 inches display, 1.7 GHz MediaTek Octa-core processor, Dual SIM support, 16 GB ROM & 2 GB ROM, Scratch-resistant Sony Mobile BRAVIA Engine 2 display and 2600 mAh battery.
Mediatek MT6752 Octa-core processor with 1.7 Ghz clock speed runs all the applications smoothly and 2 GB added RAM make it processing tasks much faster, but there is one thing to notice whenever the camera is used the phone slightly heats up.
The very first thing that you need to do is to check battery voltage at its terminals in order to verify whether the problem is with the battery or with anything else. (Battery voltage should be at least 3.8V).
If the battery voltage is lower than 3.8V or is not showing charge then it means you need to change your battery in first place and check.
Now check battery connectors physically for any physical or water damage. In case it is water damage than clean the battery contacts. Besides that, also re-solder these battery contacts and make jumpers.
In case all of the above method doesn’t resolve your problem then check the entire board for any traces of water damage gently heat or re-solder if needed.
Sony E5333,Battery Terminal, Battery Points,Battery Jack Problem, Battery Terminal Solution,Battery Terminal Jumpers,Battery Power Ways