iPad Mini Battery Connector Ways Point Jumper Solution
iPad Mini Battery Connecter Jumper Battery Terminal Jumper Solution
In this post, you will find a solution for damaged Apple iPad Mini battery connector. Battery connectors in these phones are soldered onto the motherboard and sometimes get damaged if the mobile phone is mishandled.
If a leg or two of the connector is broken just replace the whole battery connector with a new one. If the prints of the iPad Mini battery connector are broken then you need to make the jumpers to the connecting points as shown in the diagram below.
Hardware Solution:
Steps that must be done is to check the battery lines, as shown above, check the path carefully one by one, do not forget to also check through the resistor in the line, if something is broken, resold. There is a path-breaking try to make jumpers carefully and thoroughly.
iPad Mini Battery Connecter Terminal Ways
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
Disassemble the phone iPad Mini and check battery connectors if these are loose or not fix. Then check the whole motherboard for water and rust damages, Carbon or broken parts.
If find some rust or carbon make it clean with electronics cleaner and apply hot air with a heat gun to make it dry.
Find out these parts that are identified in above diagram and make a check for volts. If find some broken parts or tracks are missing then apply jumpers as given in above diagrams.
iPad Mini, Battery Terminal, Battery Points, Battery Jack Problem, Battery Terminal Solution, Battery Terminal Jumpers, Battery Power Ways
