Nokia Asha 202 Power Button Ways On-Off Key Jumper


Nokia Asha 202 Power Button Ways On-Off Key Jumper
Nokia Asha 202 – NOKIA 203 Power On Off Key Button Switch Jumper Ways Power Problem Solution Power Problem Solution Power Key Jumper On-Off Key Not Working

Here’s a solution dealing with Nokia Asha 202 Power On-Off or End key malfunction. If the device will unable to power and it shows charging indication when the battery charger is plug-in this solution might help and fix the problem.

First of all check the phone if anything else is not causing this problem. If your phone is off and you can’t check the button plug the charger in and see if the phone is charging if it isn’t turning and it isn’t charging too then probably the problem is with your phone’s software and you need to flash it. If the phone is on or charging but the power button is not working make the jumpers as shown in the diagram below.
Oppo A37 Power Button Jumper, Power Key Ways, Power Problem Repair Solution

Hardware Solution:

Nokia Asha 202 Power Button Ways On Off Key Jumper

Repair hints for Power Switch problem on Nokia Asha 202:
1. Check the power switch assembly, if the assembly is damaged replace the switch.
Sometimes even if the powerswitch is not not visually damaged, see to it that it still working by using a
2. For lifted button switch solder terminal pads on the PCB board, manage to re-establish the switch to its original position and bond it perfectly so that it won’t easily break. Then manage to reconnect the power switch line paths and the ground connection. If you can see an empty components solder pads just below of it, you can connect it to that spot. that is also connected to the power switch.

Read More:-  Nokia Asha 301 White Display Problem Repair Solution

If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

Leave A Reply

Your email address will not be published.