Download QGDP Tool – Latest Version (Supports Qualcomm & MTK)

Download QGDP Tool – Latest Version (Supports Qualcomm & MTK))

Here in this article, we will guide you on how to download and install the firmware using QDGP tool. QGDP is an advanced and an upgraded version of YGDP tool. You can use QGDP to flash the firmware in CPB File format. Most of the brands like Advan, Evercoss, etc use this flash tool to install the Stock firmware. So if you have any device which supports CPB file extension then you are in the right place. Just download the Stock firmware and flash the firmware using QGDP tool.

Download QGDP Tool – Latest Version    – QGDP-MTK1744-ASE-v.3.2.0

Download QGDP Tool Latest Version

How to Flash Firmware Using QGDP Tool:

Only Qualcomm & MTK CPU can be flashed using QGDP tool.
1- Download the latest QGDP tool.
2- Install ADB driver & MTK Driver.
3- Now, connect mobile to PC.
4- Open device manager and confirm your mobile has been identified by PC.
5- Unzip tool and run the setup.
6- When tool interface appears, enter Username=admin & Pass=123456 as password.
7- Click on Login to use the tool.

QGDP Tool

8- Click on Config and select CPU model.
9- Click on CPB file and assign the path of firmware.
10- Switch off Mobile, connect it to PC using USB cable.
11- Click on start.
12- Flashing starts and when completed Cell 0 will turn in to green color.

READ MORE:-  Guide To Remove Security Code From Nokia 3310 TA-1030

You might also like

Leave A Reply

Your email address will not be published.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

30 Shares
Share30
Tweet
Pin
+1