Xiaomi Redmi Note 4X Headphone Ways Handfree Problem Solution
Redmi Note 4X Handsfree Jumper Headphone Problem Repair Solution Headset Not Working Headphone Icon Activated Headphone Jumper Ways
This post is for Xiaomi Redmi Note 4X Headphone problem solution. So if you are having Headphone Mode problem and handsfree symbol issues with your Redmi 6 Pro diagrams in this post can help you to repair Redmi Note 4X Headphone Problem.
Reasons for Xiaomi Redmi Note 4X Headphone Problems
The problem might be in the Audio Jack of your phone, you might need to replace Audio Jack.
Volume settings might be low or there might be a problem in your headset.
Dry soldering of Audio Jack contact pins or any kind of water damage might also have damaged your audio jack onboard connector.
Check your phone’s volume settings and check.
Restart your phone and check.
Check with any other working headset in order to verify the actual cause of the problem.
Xiaomi Redmi Note 4X Headphone Mode Solution | Handsfree Mode Activated Problem
Clean Audio jack contacts with the help of cotton cloth and check.
Re-solder all the pins of Audio Jack and check, as sometimes it becomes dry solder or soldering comes off due to any kind of physical damage. Also, check for traces of water damage and clean it.
If the above-mentioned steps fail then replace your Audio jack with a new/working one.
All the above method fails then make a jumper like below diagram.
All the above methods will surely solve your problem, but make sure that you check the status of your Audio Jack after every step you perform, as it might be able to solve that problem.
Potential solutions to audio problems on your Xiaomi Redmi Note 4X:
A recommended approach in troubleshooting software-related issues in mobile devices is to think of what has happened prior to the onset of the problem. This means that you need to backtrack the changes you’ve made and actions have done to your phone before it started to lose sound or show other audio symptoms. Once you figured out the root cause, you can go ahead and work straight on a solution. However, there are just some instances when the problem just occurred to your device and you couldn’t get to identify the underlying cause. In this case, you may attempt to fix the problem using a trial-and-error troubleshooting approach. All you have to do is try all applicable solutions then test your device to find out the output. To give you some more inputs, here’s a list of standard solutions and pertinent workarounds for you to try on.