Realme C2 RMX1941 ISP Pinout to Remove Pattern Lock and FRP

0

Here is the direct Isp Pinout for Realme C2 RMX1941 Remove Pattern Lock Bypass FRP Lock is now available. You can easily get the ISP Pinout connection of the Realme C2 by following the full guide below along with images. By using the ISP Pinout, you can easily bypass FRP lock or reset user data on your device via UFi Box. Check out the guide below.

The Realme C2 can be used to overcome some software problems on Realme C2 RMX1941 phone, to direct it you can use a flasher box that has direct isp feature support and usually the flasher box can also be used for repairing emmc like Easy Jtag, Ufi, etc.

Remove Pattern Lock, Screen Lock, Finger Lock in Realme C2 RMX1941 with UFI Box you can easily solve with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged, your USB socket will not properly work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Realme C2 Overview

The C2 is a budget offering from Realme and is the successor of the Realme C1. It sports a 6.1-inch HD+ display with Corning Gorilla Glass 3 for protection. It has good viewing angles and also offers the option to change the colour temperature of the display.

The Realme C2 is well designed and has a diamond-cut pattern on the back that makes it look premium. The phone is compact and feels comfortable to hold in the hand. It has a dual camera setup at the back which consists of a 13-megapixel primary camera and a 2-megapixel depth sensor.

Read More:-  Vivo Y91, Y91i , Y93 ISP Pinout to ByPass FRP and Pattern Lock

What is ISP Or eMMC Pinout?

ISP orIn-system programming also known as in-circuit serial programming for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile. The eMMC solution consists of at least three components – the MMC (multimedia card) interface, the flash memory, and the flash memory controller – and is offered in an industry-standard BGA package.

Usage of Realme C2 RMX1941 ISP Pinout :

Read/Write EMMC via ISP.
Read/Write EMMC via direct connect (EMMC installed in socket).
One-click boot repair via direct emmc connection.
Read MMC info (Many usefull info there such as read/write counter, error counter, etc)
Factory EMMC formatting.
Low EMMC formatting.
Master/Slave partition activation
EMMC smart repartition.
EMMC partition cloning.

Realme C2 RMX1941 ISP Pinout Image

Realme C2 RMX1941 ISP Pinout

How To Remove Realme C2 Pattern FRP Using UFI Dongle:

  • Remove the back panel of the device and connect the wire to the ISP Pinout.
  • Next, connect the correct ISP Pinout to the UFi Box
  • Check “Direct eMMC (ISP)”
  • Then Click on “Identify eMMc.
  • Connect your Realme C2 to the PC via a USB cable.
  • Head over to the PC and open Device Manager.
  • If your device is located there, run the UFi Box.

UFI EMMC User Partition

  • Go to USERAREAPART
  • Now Click on Special Task ► [Oppo] MasterClear ► Wipe Data Only
  • Now Click on Special Task ► Clear FRP Lock
  • Done.

Video Guide:

Leave a Reply

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More