Oppo A5 (2020) ISP Pinout For User Lock Remove And Flashing

0

ISP Pinout for the Oppo A5 (2020) CPH1931 and EMMC Point that can be used to Directly Read and Write the EMMC Memory by using the Supported box Like UFI & Easy Jtag. The EMMC Pinout image we share below is a tested file and fully working with UFI Box.

Remove Pattern Lock, Screen Lock, Finger Lock in Oppo A5 (2020) with UFI Box you can easily solve with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged, your USB socket will not properly work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Oppo A5 (2020) Overview

Oppo A5 2020 smartphone was launched on 11th September 2019. The phone comes with a 6.50-inch touchscreen display. Oppo A5 2020 is powered by an octa-core Qualcomm Snapdragon 665 processor. It comes with 3GB of RAM. it runs on Android 9 Pie and is powered by a 5000mAh battery.

Oppo A5 2020 on the rear packs a 12-megapixel primary camera; a second 8-megapixel camera; a third 2-megapixel camera and a fourth 2-megapixel camera. It sports an 8-megapixel camera on the front for selfies.

What is ISP Or eMMC Pinout?

ISP orIn-system programming also known as in-circuit serial programming for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile. The eMMC solution consists of at least three components – the MMC (multimedia card) interface, the flash memory, and the flash memory controller – and is offered in an industry-standard BGA package.

Read More:-  Oppo A31 ISP Pinout For Remove Userlock And Bypass FRP

Oppo A5 (2020) ISP Pinout Image

Oppo A5 2020 CPH1931 ISP Pinout

Usage of ISP Pinout :

Read/Write EMMC via ISP.
Read/Write EMMC via direct connect (EMMC installed in socket).
One-click boot repair via direct emmc connection.
Read MMC info (Many usefull info there such as read/write counter, error counter, etc)
Factory EMMC formatting.
Low EMMC formatting.
Master/Slave partition activation
EMMC smart repartition.
EMMC partition cloning.

How To Remove Oppo A5 (2020) Pattern FRP Using UFI Dongle:

  • Remove the back panel of the device and connect the wire to the ISP Pinout.
  • Next, connect the correct ISP Pinout to the UFi Box
  • Check “Direct eMMC (ISP)”
  • Then Click on “Identify eMMc.
  • Connect your Oppo A5 (2020) to the PC via a USB cable.
  • Head over to the PC and open Device Manager.
  • If your device is located there, run the UFi Box.

UFI EMMC User Partition

  • Go to USERAREAPART
  • Now Click on Special Task ► [Oppo] MasterClear ► Wipe Data Only
  • Now Click on Special Task ► Clear FRP Lock
  • Done.

Leave a Reply