Xiaomi Redmi 8A Charging Ways | Charging Problem Solution

0

In this post, we will tackle the not charging issue on the Redmi 8A, Charging Ways, and its jumper solution, a mid-range device with impressive specs. After providing support to Android users for years, we can already predict that this kind of power-related issue would be among the first ones Xiaomi Redmi 8A owners may encounter. That is why we find it necessary to publish articles like this because we know one-day complaints about this problem will come rushing into our inbox.

There are several possible causes of charging problems (including the not charging / “grey battery” issue). Some of the most common include:

Bent, broken or pushed in connectors on the device or battery
Damaged battery
Defective charging unit or cable
Temporary phone problem
Phone is defective

Hardware Reasons for Redmi 8A Charging Problem

There are four basic hardware-related reasons that your Redmi 8A could be charging slowly, and I will explain each of them in turn and in order of increasing probability. The issue could be:

  1. There is dirt, dust, or debris lodged in the charging port.
  2. The power adapter is damaged or faulty.
  3. The USB cable is no longer working properly.
  4. You are using the wrong power adapter for your phone, or a weak USB port.

Redmi 8A Charging Ways -Repair Not Charging Problem

In the below image we draw the Redmi 8A charging ways and its jumper check continuity using a multimeter if any track damage makes a jumper on the Redmi 8A motherboard.

Xiaomi Redmi 8A Charging Ways   Charging Problem Solution

  1. First, open the mobile
  2. Then clean the section of the charging connector of the mobile motherboard
  3. Then remove the old charging connector and add a new connector
Read More:-  Xiaomi Mi 10 Audio Problem Repair Solution - Speaker Ways

How To Repair Redmi 8A Not Charging Problem:

Redmi 8A Charging Ways Charging Jumper Solution Slow Or Fake Charging Solution

After the mobile phone disassembles, you will need to take some steps shown in the diagram above.

Check the Charging jack and its points do they have good value if yes, then change the changer and check it and if the motherboard does not see the accurate value with the charging points, then after the dissatisfaction of the mobile phone you get something shown in the above diagram You have to take steps.

Check the Charging jack and its points are good values if yes, then change the changer and check it and if the motherboard does not see the accurate value with charging points, then you will see all the parts and tracks given in the diagram of Redmi 8A Are to investigate.

If any corrosion or carbon and water damage or any component are damaged, then the motherboard should be replaced carefully. If a track is lost then the jumper is applied and if any part is damaged or broken, replace it with the new one.

More information about this problem and solutions for new tips and tricks are going to this page, if there are new updates, there will be updates. Below are some related posts, you can read more about mobile phones.

Leave a Reply