Here we will discuss the Xiaomi Redmi A2 Not Charging Issue, Charging Ways, and Jumper Solution, a midrange device with impressive specs. With our years of experience supporting Android users, we can already predict that Redmi A2 users will experience this kind of charging and power-related issue.
The Xiaomi Redmi A2 is an entry-level smartphone with a 6.5-inch HD+ Infinity-V display. It is powered by a MediaTek Helio G36 with 2GB of RAM and 32GB of onboard storage that can be expanded with a microSD card. Additionally, the Xiaomi Redmi A2 features a rear camera with 8 MP and a front camera with 5 MP. The device is powered by a 5,000mAh battery.
First, check the charging port on your device to ensure that it is not blocked or damaged. If it is, try using a small object such as a toothpick to gently remove any debris. Once the port is clear, try plugging in your charger and attempting to charge the device.
If the charger is working properly, the next step is to check the battery life of the device. To do this, press and hold the power button until the device turns off. Once the device is off, press and hold the power button again until the device turns back on. If the battery life indicator is low, it might be time to replace the battery.
Hardware Reasons for Xiaomi Redmi A2 Not Charging Problem
There are four basic hardware-related reasons why your Redmi A2 could be charging slowly, and I will explain each of them in turn and order of increasing probability. The issue could be:
- There is dirt, dust, or debris lodged in the charging port.
- The power adapter is damaged or faulty.
- The USB cable is no longer working properly.
- You are using the wrong power adapter for your phone, or a weak USB port.
Xiaomi Redmi A2 Charging Ways – Repair Not Charging Problem
In the below image, we draw the Xiaomi Redmi A2 charging ways and its jumper check continuity using a multimeter if any track damage makes a jumper on the Redmi A2 motherboard.
- First, open the mobile
- Clean the section of the charging connector of the mobile motherboard
- Remove the old charging connector and add a new connector
How To Repair Xiaomi Redmi A2 Not Charging Problem:
Xiaomi Redmi A2 Charging Ways Charging Jumper Solution Slow Or Fake Charging Solution
After the mobile phone disassembles, you will need to take some steps shown in the diagram above.
The following are some of the most common reasons for difficulty in charging and other battery-related issues, such as the grey battery issue:
- Shorted or defective diode
- Shorted or defective capacitors
- Defective resistors
- Poorly functioning or damaged charging coil
- Shorted or faulty integrated circuit
- Poorly functioning USB port
- Incomplete connection.
There are a few simple steps that can be followed to resolve the Xiaomi Redmi A2 charging issue. Using a few tools, you can diagnose the problem and replace the faulty components. You should be able to use your phone normally and charge it properly in no time if you follow these instructions correctly.
We will add more information about this problem and solutions for new tips and tricks to this page if there are any new updates. You can read more about mobile phones in the following related posts.