If you’re looking for the updated Xiaomi Redmi Note 14 Pro ISP pinout, you came to the right place! When performing UFS chip programming, FRP bypass, Remove MDM Lock, Remove user lock, Recover data or repair dead boot, the ISP pinouts are the first and most important step.
As mobile technicians, we often deal with bricked, locked, and not detected devices; this is where an ISP connection directly to the UFS chip is required. In this article, I will provide you with the verified ISP pinout for Xiaomi Redmi Note 14 Pro 5G that I have personally verified, what it is, and how it can be used safely for repair and recovery purposes.
What is Xiaomi Redmi Note 14 Pro ISP Pinout?
ISP (In-System Programming) pinout helps you to connect directly to the UFS memory chip of a mobile phone. This helps in reading and writing data using tools like Easy JTAG, UFI, or CM2 without removing the chip from the motherboard.
Xiaomi Redmi Note 14 Pro UFS ISP Pinout Diagram
Here’s an actual image of the Xiaomi Redmi Note 14 Pro motherboard with the ISP pinout clearly labelled :
Pinout Labels:
RXOP – Receive Out Positive
RXON – Receive Out Negative
RST – Reset
TXOP – Transmit Out Positive
TXON – Transmit Out Negative
How to Use Xiaomi Redmi Note 14 Pro ISP Pinouts?
- Power off the phone.
- Open the back cover and disconnect the battery.
- Clean the pinout area on the motherboard.
- Solder fine jumper wires to the RXOP, RXON, TXOP, TXON, and RST points as shown in the image.
- Connect these to your UFS programmer or box.
- Follow your tool’s instructions for reading, writing, or removing security locks.
Tips for Mobile Technicians
- Use a good microscope and fine soldering tools.
- If you’re new to ISP, don’t rush—practice on scrap boards first.
- Always double-check pin connections before powering the tool.
- Document or snap a picture of your wiring for future reference.
When Do You Need the ISP Pinout for Xiaomi Redmi Note 14 Pro?
- If you need to unlock FRP, and standard methods do not work
- When the device is dead and not detected by the PC (EDL not working)
- For reading or writing firmware directly to UFS
- In cases of user data extraction or dead boot repair
That’s it!
With these Xiaomi Redmi Note 14 Pro ISP pinouts, you can easily perform UFS operations for repair or data work. For more ISP pinouts and mobile repair tips, keep visiting our blog!
