Samsung Galaxy S6 G920F Charging Jumper Solution Ways
The picture below shows the basic components needs to check if the phone somehow doesn’t charge if the wall charger is plug-in. But you may first ensure that the wall charger and the phone’s battery you are using are still working. A drained battery will not charge, try to plug the battery charger around an hour or try to replace it with a good one, to quickly check if the battery got the problem.
So if you are experiencing any charging problem or problem connecting your Samsung Galaxy S6 G920F to your computer via USB cable then it is possible that your Samsung SM-G920F charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.
Samsung Galaxy S6 G920F Charging Usb Jumper Ways
Clean dust on charging connector, you can do that simply with the help of a brush.
Check whether the Charging pin in connector is in good shape or not. In order to verify, check voltage at the first pin and it should be 5V. If it isn’t then it means that the pin is broken from inside. You can check it after connecting charger.
If the Pin is broken, change the Pin and Check voltage again.
Check above mentioned Charging ways. If you find any problem or broken any ways then apply jumper.
Samsung Galaxy S6 G920F,Usb,Charging,Problem,Solution,Jumper,Ways
Samsung SM-G920F Usb not charging, Usb not recognized, charging not save, not charging
