IPad 2 Touch screen Not Working Problem Solution Jumper Ways
Apple iPad 2 Touch Screen Problem Repair Ways Solution
If ever trying to fix Apple iPad mini 2 touch screen failure issues and you’ll do replacing the touch plate module, trying to calibrate the touch screen setting but unresponsive and restoring, upgrading and flashing the device firmware but nothing happens, the problem still exist and the touch screen left unresponsive.
This sometimes happens if the device suffered due to a wet damaged, heavily dropped and any related damaged accidentally done by the user. In this case only a hardware repair may only help solved the problem.
This solution below show the iPad mini 2 Touch Screen Solution Jumper Ways PCB board components that holds and control the touch screen panel to work.
Hardware Solution:
IPad 2 Touch Screen Connector Problem Jumper Solution Ways
The very first thing that you need to do is to unplug, clean and reconnect touch screen connector strip and check, in most cases this has found to be a good and effective solution of this problem.
If the above step fails then look for any traces of water damage on your iPad mini 2 motherboard. In case you find that then properly clean the entire board and also use a heat gun for a few seconds so that there are no traces of water left behind. This is also a one effective solution for that and any phone that has touch screen problem due to water or moisture is able to overcome this type of problem.
Now re-solder on-board connector tracks and check.
If everything else fails then gently heat Touch IC. If the touch screen is faulty replace it, as you don’t have any other option left than that.
Apple iPad mini 2 Touch Screen, Touch Problem, Touch Solution,Touch Screen Ways,Touch Screen Jumpers
