Samsung J3 J320H Power Key Ways Power Button Jumper Solution
Some have reported that after using the Samsung Galaxy J3 J320H for sometime, there could be a chance that you can break the Galaxy J3 power button. Then it becomes almost impossible to turn ON the Samsung Galaxy J3 J320H when the power button is broken. So you may be asking, how to turn ON Samsung Galaxy J3 without power button working?
Don’t worry if you’ve broken or damaged the power button on your smartphone; just follow the step-by-step instructions below how to turn Galaxy J3 ON without power button.
Here’s the jumper ways solution for Samsung Galaxy J3 J320H ON and OFF switch if the handset device showed charging indication when the battery charger is plug-in but unable to power up when the power button is being pressed.
Besides that, a problem in power button might also cause your phone to restart at times, which becomes very much annoying and it troubles you to the masses.
In the following lines you will get to know about Samsung SM-J320H power button problems as well as their solutions:
For Samsung Galaxy J3 J320H power button problem there is no work around method, however you can try using a pin and move it all around the Samsung J320H power button, as this might be able to take away some stiffness from your power button.
Samsung Galaxy J3 J320H Power Switch Hardware Solution
The two upper or legs of the power switch is connected to the PCB’s ground lines.
The other two which is in lower is the power switch line paths, just locate the test spots as shown on the solution above where to apply a jumper to reconnect it connection.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung SM-J320H,Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Power Problem