Oppo A3s CPH1853 ISP Pinout For Flashing Remove Pattern And FRP

By Mobile Rdx Last updated Jun 8, 2020

Here are the direct Isp Pinout for Oppo A3s CPH1853 Remove Pattern Lock Bypass FRP Lock is now available. You can easily get the ISP Pinout connection of the Oppo A3s CPH1853 by following the full guide below along with images. By using the ISP Pinout, you can easily bypass FRP lock or reset user data on your device via UFi Box. Check out the guide below.

The Oppo A3s CPH1853 can be used to overcome some software problems on Oppo A3s CPH1853 phone, to direct it you can use a flasher box that has direct isp feature support and usually the flasher box can also be used for repairing emmc like Easy Jtag, Ufi, etc.

Remove Pattern Lock, Screen Lock, Finger Lock in Oppo A3s CPH1853 with UFI Box you can easily solve with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged, your USB socket will not properly work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Oppo A3s CPH1853 Overview

PPO A3s smartphone runs on Android v8.1 (Oreo) operating system. The phone is powered by Octa core, 1.8 GHz, Cortex A53 processor. It runs on the Qualcomm Snapdragon 450 Chipset. It has 2 GB RAM and 16 GB internal storage.

What is ISP Or eMMC Pinout?

ISP orIn-system programming also known as in-circuit serial programming for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile. The eMMC solution consists of at least three components – the MMC (multimedia card) interface, the flash memory, and the flash memory controller – and is offered in an industry-standard BGA package.

Oppo A3s CPH1853 ISP Pinout Image

Usage of ISP Pinout :

Read/Write EMMC via ISP.
Read/Write EMMC via direct connect (EMMC installed in socket).
One-click boot repair via direct emmc connection.
Read MMC info (Many usefull info there such as read/write counter, error counter, etc)
Factory EMMC formatting.
Low EMMC formatting.
Master/Slave partition activation
EMMC smart repartition.
EMMC partition cloning.

How To Remove Oppo A3s CPH1853 Pattern FRP Using UFI Dongle:

Remove the back panel of the device and connect the wire to the ISP Pinout.
Next, connect the correct ISP Pinout to the UFi Box
Check “Direct eMMC (ISP)”
Then Click on “Identify eMMc.
Connect your Oppo F11 Pro to the PC via a USB cable.
Head over to the PC and open Device Manager.
If your device is located there, run the UFi Box.

Go to USERAREAPART
Now Click on Special Task ► [Oppo] MasterClear ► Wipe Data Only
Now Click on Special Task ► Clear FRP Lock
Done.