Vivo V17 Pro PD1931F EDL Test Point – Boot Into EDL 9008 Mode


In this tutorial, we will show you how to boot Vivo V17 Pro PD1931F EDL mode 9008 using test points? Emergency downloading mode or 9008 mode is very important to unbrick Qualcomm Vivo V17 Pro mobile. There may be a condition when your Android device was in boot loop condition or bricked, but the bootloader has not been still unlocked. This condition will force you to use the Test Point process. It would be not possible to unlock the bootloader because the device is boot looped or bricked.

If you happen to own an Android device running a Qualcomm processor chances are that your device supports Emergency Download Mode aka EDL Mode.EDL mode is a Qualcomm enabled feature, that is useful to unbrick device, unlock bootloader or modify protected device parameters. However, not all Qualcomm-based devices support it.

About Vivo V17 Pro Vivo V17 Pro smartphone runs on the Android v9.0 (Pie) operating system. The phone is powered by Octa-core (2 GHz, Dual-core, Kryo 460 + 1.7 GHz, Hexa Core, Kryo 460) processor. It runs on the Qualcomm Snapdragon 675 Chipset. It has 8 GB RAM and 128 GB internal storage.

What Is Vivo V17 Pro Test Point Or  EDL Mode?

If you are a newbie user then probably EDL mode may be new word for you. But if you are involved in rooting and flashing firmware then absolutely not.

In short, EDL mode is also known as emergency mode for mobile. Technically all the Vivo devices come with EDL mode option. If you want to install or update your own Redmi 8A phone then you have many options to flash new stock ROM on the device using Recovery Mode or using fastboot mode. Both methods have some limitations like Recovery ROM can be used only to update higher version and you can’t downgrade Huawei version.

Read More:-  Huawei P Smart 2020 Test Point For Remove User Lock, FRP And Flashing

Vivo V17 Pro Test Post EDL 9008 Mode:

Find EDL MODE FOR Vivo V17 Pro Vivo V17 Pro PD1931F EDL Test Point – Boot Into EDL 9008 Mode

Power off the device if possible.

Open back cover of dead Vivo V17 Pro  [You may do Google to tear down Vivo V17 Pro. [Be careful at the time of removing back cover of the device and make sure you are not going to damage any hardware of the device] Once you are able to remove back cover, disconnect the battery connector first. Battery not required for EDL mode. Use tweezers, short pin those 2 red dots you see in the picture, plug the USB cable in and you will get your EDL/9008 service port opened.

Uses Of Vivo V17 Pro Test Point

  • Install stock ROM on Vivo V17 Pro
  • Flash Vivo V17 Pro without unlocking the bootloader. Bootloader unlocking permission not required.
  • Recovery dead Vivo V17 Pro by flashing firmware.
  • Install stock ROM easily, if the device is not able to boot into fastboot mode or device stuck on Huawei Logo.

Note: It’s really just to understand that EDL mode flashing is a universal method for all Huawei devices. But EDL booting process may be different for different devices. For some devices, you can use the EDL boot command but problem is that nowadays edl command doesn’t work for all the latest Huawei smartphones. So the test point is the easiest and perfect method to boot any Nokia phone into edl mode using test terminals.

Leave A Reply

Your email address will not be published.