Close Menu
    |
    Test Point

    Samsung Galaxy Note 20 Ultra 5G Test Point – EDL Mode 9008

    By

    Samsung Galaxy Note 20 Ultra 5G Test Point – EDL Mode 9008

    Samsung Galaxy Note 20 Ultra 5G EDL Point is a hardware-specific ISP pinout or test point used to enter the device into the EDL mode (9008) for flashing firmware, unlocking, or repairing. If your Samsung Galaxy Note 20 Qualcomm phone is bricked, you have forgotten the pattern lock, or you cannot unlock FRP, then theSamsung Galaxy Note 20 Ultra 5G EDL Test Point can help you quickly fix it.

    What is the Samsung Galaxy Note 20 Ultra 5G EDL Mode

    The EDL mode (Emergency Download Mode) can connect Qualcomm Android phones to computers via the Qualcomm HS-USB QDLoader interface. To boot into the EDL mode, you must short two test points on the device’s motherboard or use a unique tool to which the device’s bootloader has granted permission. Nowadays, Android devices manufactured by Qualcomm come with locked USB drives and bootloaders. Without authorization, the device cannot be booted into Download mode. To boot into the EDL (Emergency Download Mode), you must use the EDL Point.

    Samsung Galaxy Note 20 Ultra 5G EDL Point (Test Point) ISP Pinout Image

    Samsung Galaxy Note 20 Ultra 5G Test Point EDL Mode 9008

    Rebooting Samsung Galaxy Note 20 Ultra 5G into EDL Mode 9008

    • On your computer, download and extract the Qualcomm USB Driver
    • Download and install the Qualcomm USB driver
    • Turn off your Qualcomm Android device by pressing the power button
    • Take off the phone’s back cover
    • Check out the image below
    • The EDL PinOUT/Test Point can be found on the circuit board of your phone
    • To short that pinout, you need copper wire or tweezers
    Read More:-  Nokia 2.1 TA-1084 Test Point Boot Into Edl 9008 Mode

    Reboot EDL Mode 9008

    • Connect your smartphone to the PC using a USB cable once you’ve finished
    • That’s it,
    • You can now use any unlocking or flashing tool for Qualcomm to fix your phone.

    Samsung Galaxy Note 20 Ultra 5G FRP Bypass Using ChimeraTool

    • Launch the Chimera program.
    • Boot Samsung Galaxy Note 20 Ultra 5G Into Edl 9008 Mode Using the above Test Point.
    • Click On Auto Detect Mode.

    Samsung Galaxy Note 20 Ultra 5G FRP Bypass Using ChimeraTool

    • Next, select the option to remove the FRP lock and wait for the following message to appear.

    Samsung Galaxy Note 20 Ultra 5G FRP Bypass Using ChimeraTool 2 Samsung Galaxy Note 20 Ultra 5G FRP Bypass Using ChimeraTool 3

    Uses Of Samsung Galaxy Note 20 Ultra 5G Test Point

    • Reviving a bricked device through firmware flashing
    • Overcoming FRP lockout after factory reset
    • Unlocking the device after forgetting the pattern lock
    • Installing custom firmware for improved performance and customization
    • Debugging and testing hardware and software for issue resolution by technicians and developers.
    Note: It’s important to understand that EDL mode flashing is a universal method for all Samsung devices. However, the EDL booting process may vary for different devices. For some devices, you can use the EDL boot command. The problem is that the EDL command doesn’t work for all the latest Motorola smartphones. Therefore, using the test point is the easiest and most reliable method to boot any Motorola phone into EDL mode using the test terminal.

    Related Posts

    Add A Comment
    Leave A Reply