This guide will show you the real image of the Test point for the Xiaomi Poco X5 5G. Using the Test Point PinOUT, you can easily restore the stock ROM, bypass the FRP lock, or reset user data via UFi Box and UnlockTool.
Are you a mobile technician and get the Xiaomi Poco X5 5G smartphone? Then this guide will be helpful to you. Suppose you bricked your device, lost your pattern lock details, or cannot verify your Google account after the hard reset. In that case, you can bypass it quickly using this guide.
What is the Xiaomi Poco X5 5G EDL Mode
The EDL mode (Emergency Download Mode) can connect Qualcomm Android phones to computers via the Qualcomm HS-USB QDLoader interface. To boot into the EDL mode, you must short two test points on the device’s motherboard or use a unique tool to which the device’s bootloader has granted permission. Nowadays, Android devices manufactured by Qualcomm come with locked USB drives and bootloaders. Without authorization, the device cannot be booted into Download mode. To boot into the EDL (Emergency Download Mode), you must use the EDL Point.
Xiaomi Poco X5 5G EDL Point (Test Point) ISP Pinout Image
Caution: Accessing the Test Point and entering EDL Mode 9008 should only be attempted by experienced users. Incorrect procedures can potentially damage your device.
Locate the Test Point: The Test Point on the Xiaomi Poco X5 5G typically located on the motherboard, near the battery connector. Its exact location may vary slightly depending on the specific model and region.
Prepare the Device: Ensure the device is powered off and disconnected from any power source. Short the Test Point: Carefully short the Test Point to the ground using a conductive tool such as tweezers or a specialized Test Point jig.
Connect to PC: While the Test Point is shorted, connect the device to a PC using a USB cable. 
Uses Of Xiaomi Poco X5 5G Test Point
- Reviving a bricked device through firmware flashing
- Overcoming FRP lockout after factory reset
- Unlocking the device after forgetting the pattern lock
- Installing custom firmware for improved performance and customization
- Debugging and testing hardware and software for issue resolution by technicians and developers.
Other Ways to Enter EDL Mode on Xiaomi Poco X5 5G
Follow the instructions below carefully to boot your device into EDL Mode (Emergency Download Mode)Using Adb Mode
- First, install ADB & Fastboot driver on the PC and then turn on USB debugging on your phone.
- Now connect your device with a PC using a USB Driver.
- Then open a command window on your PC, paste the following commands, and hit enter.
adb reboot edl
- If any pop-up appears on the phone screen, then ADB access will be allowed.
Fastboot mode
- Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
- Boot your device into the bootloader
- Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
- now enter the command
.\fastboot oem edl
