You can find the Oppo A78 Test Points to Boot the Device in BROM Mode here. The test point plays an extremely important role in mobile repair and software problem-solving, mainly when a device is unresponsive (dead), is locked, or will not be detected by flashing software normally using a common USB connection on a computer.
A test point is a special hardware point on the motherboard of the smartphone. By shortening the test points, you can force the device into (brom) mode, which allows the repair tool to communicate with the phone at a deep level. It is very useful for this:
What is the Oppo A78 CPH2495 Test point?
Many Oppo A78 5G CPH2495 face issues such as dead boot, system corruption or FRP lock. In such cases, normal download or fastboot mode cannot work. When the Oppo A78 test point method becomes the only solution. With the help of the test point, you can force the device into brom mode and repair it using tools such as SP flash tool, Hydra tool, CMMTK2, Unlock Tool or UMT. Without using the test point, these devices cannot detect the device when it is completely dead.
- Dead boot issues fixing
- Bypassing FRP lock
- Firmware flashing
- IMEI and security partitions
- Data recovery operation
Oppo A78 Test Point Image:
The following image will guide you through shorting the pinout and successfully rebooting your Oppo A78 CPH2495 to Emergency Download Force Brom Mode.
Step-by-step Guide to Use Oppo A78 Testing Point
- First, switch off the Oppo A78 completely and remove the back cover.
- Disconnect the battery connector for safety.
- Locate the Oppo A78 test point on the motherboard (refer to the diagram above).
- Use a tweezer or jumper wire to shorten the test point on the ground.
- Connect the device to your PC using a USB cable.
- Open your Mobile Repair tool. and use the function you want.
- This process is not easy, so it is recommended that only experienced technicians attempt it. Running the test point incorrectly can cause permanent damage to the phone.
