HTC One M10 Charging And Battery Connector Ways Solution
HTC M10 Charging Problem USB Jumper Solution Charging Solution Battery Connector Ways
In HTC One M10 USB cable connector is also used for charging the phone. Because of excessive use or any other reason USB connector can be damaged.
So if you are experiencing any charging problem or problem connecting your HTC One M10 Charging Ways Solution USB Jumper to your computer via USB cable then it is possible that your HTC M10 charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.
HTC One M10 runs Android,6.0.1 Marshmallow and features 5.15 inches AMOLED 1440 x 2560 pixels display and a Quad-core (2×2.15 GHz Kryo & 2×1.6 GHz Kryo) 4GB RAM Qualcomm MSM8996 Snapdragon 820 processor paired with and 32GB native storage capacity.
Hardware Solution Charging Ways:
Resolving HTC One M10 charging problem:
Normally HTC One M10 charging problem is due to faulty charging connector, and in order to overcome that, all you have to do is to:
Remove Battery Cover, Battery and C cover, then check charging connector’s pins
First Clean and remount all the pins of charging connector.
Put Battery in again and connect the charger.
Then check the fuse and the and the diode, replace if found damaged.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
HTC One M10 Charging Solution Jumper Problem Ways No Charging Not Supported
