Download Xiaomi No Auth Firehose File Collection [Latest]

0

Download Xiaomi No Auth Firehose File Collection Latest

Here is the collection of Xiaomi No Auth Firehose File by using these files you can flash Xiaomi mi phone directly Without Authorise MI Account, Facing any software related issue like stuck in boot loop, auto restart, overheating or unable to restart your device, etc. In that case, you can install official stock ROM on a Xiaomi device using the Mi flash tool.

But the problem is that now most of Xiaomi device can’t flash directly from Mi flash tool because of MI Auth file. Normally if you will try to flash Redmi using the latest Mi flash tool, it will get fail or may show error at the time of firmware flashing.

Probably you may know that now authorise MI account login id and password is must to flash Redmi mobile. But here in this guide we will show you an easy method to flash Redmi phones without Mi auth id password and without box.

Supported processors:- Qualcomm Chipsets, Snapdragon Chipsets, Qualcomm based Android Smartphones, 3G, 4G, modems and other Qualcomm products

Download Xiaomi Mi Auth File, Flash Tool And Driver

Xiaomi_No_Auth_Firehose_File_Collection.Zip

USB Drivers: Download

Xiaomi Flash Tool: Mi Flash Tool Official

How to Flash Xiaomi Phone Using Firehose [No Need Auth] File

Pre-Requisite

  • Any Xiaomi smartphone running on Qualcomm or MediaTek chipset.
  • A PC/Laptop
  • A USB Cable

First, download all the files on your desktop.

After that, extract all the files and then open the prog emmc folder.

then copy the files from that folder and then paste the files on the extracted flash file “images” folder.

Read More:-  Download SRSRoot New Free Root Tool For Most Android Phones/Tablets

Redmi Note 6 Pro emmc file

Now install the flash tool.

After that, open the flash tool on your computer.

Redmi Note 6 Pro Flashing

Now click on the select button from there, and then give the file path of the flash file on your xiaomi flash tool.

Then put your device into edl mode.

Install the Qualcomm USB Driver on your PC

Download the Qualcomm USB driver on your PC.

After that, extract the downloaded files.

Now open the extracted folder.

There you will see “Setup.exe” double click and run the setup,

click on next -agree- next finish to installation complete.

Then follow the below process.

Redmi Note 6 EDL Mode

Redmi Note 6 Pro Test Point

Now click on the “Refresh” button

Then you will see a bar will be added on the log screen of the Xiaomi flash tool.

Now click on the Flash button.

Then you will see your flashing will be started,

Wait for the finish.

Then disconnect and power on your device.

Now you have successfully flash Redmi Note 6 Pro.

Fastboot mode

  • You need to boot your Xiaomi device into Fastboot Mode.
    • To enter Fastboot mode, make sure your phone is turned off and press and hold the Volume up + Power button.

EDL Mode

  • First, install ADB & Fastboot driver on PC and then turn on USB debugging on your phone.
  • Now connect your device with PC using USB Driver.
  • Then open a command window in PC and paste following commands and hit enter.
adb reboot edl
  • If any pop up appears on the phone screen then allow the ADB access.

If you like the guide, please share it with other communities and forums?

Read More:-  How To Take MTK Android Phone (Flash Backup) Factory Format Backup -Tutorial
Leave A Reply

Your email address will not be published.